|
|
|
產品名稱：
|
NCS伺服驅動器
|
|
型 號：
|
NCS
|
|
價 格：
|
|
|
品 牌：
|
2499
|
|
|
|
 |
 |
|
|
For Synchronizing control（NCS-FI4/FS4） |
 |
|
| 1） |
You can change the synchronous ratio in real time. The synchronous speed of winding axis of winding machine or feeding axis can be changed one by one. |
| 2） |
Lag of a relative position between the master axis and slave axis during operation cab be corrected by external signal. The synchronous ratio setting function and the electric shaft function are also available. | |
|
|
Line up wire winding machine |
|
Sectional drive printer machine |
|
Application |
Traverse control of Conveyer receiving unit, Wire winding machine, Coiling machine, Line up wire winding machine, etc. General Synchronizing control as Cable drawing machine and other various production lines. |
|
|
|
|
Flying Positioning control（NCS-FI3/FS3） |
| |
|
| 1） |
Without stopping running work materials, constant length cut and machining can be achieved and machining tact can be remarkably reduced. |
| 2） |
50 kinds of continuous machining patterns can be executed in turns. And plural machining combination as of cut and press can be achieved to work materials. |
| 3） |
By cosine compensation function, in case of vertical blade cutting machine as Rotary shirr, from the beginning of cutting, compensation is addded to get precise vertical cutting. | |
|
Application |
Carton cutter, Steel plate flying cutter, Cable and pipe cutter, Push/ Pull machining, and flying cutter control of the other production lines. |
|
|
|
|
For Genral Positioning control（NCS-FI1/FS1） |
|
| 1） |
High speed, high accuracy, and high performance. Dedicated positioning control, combined of Positioning control and high performance servo control functions. |
| 2） |
Max.280 points of internal stored data can be used to Program run. |
| 3） |
Complete close loop control can be achieved by an external encoder (measure/ linear scale). |
| 4） |
Simple teaching (reads current value by opening current device) can be conducted. |
| 5） |
Standard spinner function can program Acceleration/ Deceleration time, Rated speed time, and Decal. stop time and easily achieve Run by speed pattern. |
|
|
Example: Spinner motion |
|  |
 |
|
Positioning by angle set
by spinner function |
NCS-FCS/FS-1
Basic / Expansion of each type
FI10 / FS10 : Inner Stored data positioning
I/O (Input : 28points / Output : 8points)・・・Basic type
FI12 / FS12 : With I/O expansion board
I/O (Input : 37points / Output : 18points)
FI13 / FS13 : High speed communication type
Remote sequence + Basic type
FI15 / FS15 : Device Net type
Equipped with Device Net to meet to open Network | | |
|
|
|
